+49 (0)36 81 / 45 49 - 80
info@sht-hebezeuge.de

Wire Rope Sling Assemblies for Construction

Wire rope sling assembly with safety hooks for construction sites

Reliable sling assemblies for construction and industry

These wire rope sling assemblies are designed for lifting heavy loads in construction and industrial environments. They combine galvanised high-strength wire ropes with safety hooks and are available as one-, two- and four-leg assemblies. Select the configuration according to load weight, geometry, sling angle and the required effective length.

Design: eye-type load hooks

Single-leg assembly (1 m effective length)

Capacity
at 0° in kg		 Nominal rope
diameter in mm		 Order no.
700 08 71901208
1000 10 71901210
1500 12 71901212
2000 14 71901214
2700 16 71901216
3150 18 71901218
4000 20 71901220

Two-leg assembly

Please always specify the effective length.

Capacity
0–45° / 45–60° (kg)		 Nominal rope
diameter in mm		 Order no.
950 | 700 08 71902208
1400 | 1000 10 71902210
2000 | 1500 12 71902212
2700 | 2000 14 71902214
3600 | 2700 16 71902216
4400 | 3150 18 71902218
5600 | 4000 20 71902220

Four-leg assembly

Please always specify the effective length.

Capacity
0–45° / 45–60° (kg)		 Nominal rope
diameter in mm		 Order no.
1450 | 1050 08 71904208
2000 | 1400 10 71904210
3000 | 2000 12 71904212
4300 | 3000 14 71904214
5600 | 4000 16 71904216
6300 | 4500 18 71904218
8400 | 6200 20 71904220

Frequently asked questions

They consist of one or more wire rope legs with load hooks and a top connection. They are used wherever heavy loads must be lifted in a controlled manner, particularly in construction.

Their latch helps prevent the attachment point from slipping out of the hook unintentionally, improving protection for personnel, loads and equipment.

Consider the load weight and geometry, effective length, number of legs, sling angle, attachment points and operating conditions. The stated capacity must cover the specific lifting case.

Use the assembly correctly, store it clean and dry, and inspect it regularly for corrosion, broken wires, deformation and damage to hooks or end connections.

Applicable national regulations, inspection intervals and site rules must be observed. In Germany, DGUV Rule 100-500 is relevant to the use and inspection of lifting accessories.

Temperature can affect permissible capacity and component suitability. Always use the limits stated in the product documentation for the complete assembly.
Open PDF

Copyright © 2026 All Rights reserved by: SHT